Power M12 Plug/Cable Connector PRO (L coded)
A5E34019115-AB, 08/2021
15
3
Installation
Follow these steps to install the component:
1.
Push the clamping nut (a), the seal (b) and the
housing (c) onto the cable as shown in the figure.
c b a
2.
Remove the cable sheath and conductor insulation as shown in the figure.
9 mm 23 mm
FE
9 mm 24 mm
3.
Crimp the wire end ferrules to the stranded wires.
Using the Allen key provided (0.2 Nm), secure the wire end ferrules in the
intended intake points of the cap nut (d).
d
+0
1.3 -0.04
Allen Key
