Power M12 Plug/Cable Connector PRO (L coded)
16
A5E34019115-AB, 08/2021
4.
Align the cap nut and press it onto the housing (c). Screw the two components
together by rotating (0.6 Nm) as far as the endstop.
5.
Screw the clamping nut (a) together with the
housing (c) as far as the endstop.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining
designations in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.
Disclaimer of liability
We have checked this document for agreement with the hardware and software described.
Since deviations cannot be precluded entirely, we cannot guarantee full agreement. However,
the data in this manual is reviewed regularly and any necessary corrections included in
subsequent editions.
Siemens AG
Industry Sector
© Siemens AG 2021. All rights reserved
