Siemens 6GF3326-0HT01 Скачать руководство пользователя страница 4

Страница: 4 / 44

Preface

SIMATIC MV326

Operating Instructions, 08/2021, C79000-G8976-C644-02

Product description

The SIMATIC MV326 optical handheld reader is a sophisticated, powerful and versatile bar

code reader for manual operation. Typical areas of application: Health care, pharmacy, retail

trade and manufacturing.

Figure 1

SIMATIC MV326

Product designation

In the remainder of this document, the term "device" or "optical handheld reader" is also used

instead of the full product name, "SIMATIC MV326".

Purpose of the operating instructions

Note
The operating instructions contain all the important information about the device

Read the operating instructions before starting to work with this device.
Noting and acting on this information:
•

Ensures the device functions correctly

•

Saves you service costs

These operating instructions contain all the information you need for commissioning and

using the device.
It is intended both for persons who connect up the device electrically and commission and

operate it as well as for service technicians and maintenance technicians.

Содержание 6GF3326-0HT01













































Результаты поиска

Содержание 6GF3326-0HT01

Отзывы:

Бренды по названию

Популярные бренды

Siemens 6GF3326-0HT01, Руководство по эксплуатации

Результаты поиска

Содержание 6GF3326-0HT01

Отзывы:

Бренды по названию

Популярные бренды