Siemens 4075, Руководство по эксплуатации

Страница: 59 / 92

59
Gigaset 4070/4075isdn, Domestic, A31008-G3070-B001-53-
Wahloptionen.fm 5.7.01
Step
by
Step
Using the keypad protocol
Under CENTREX, the keypad protocol enables additional services from
other providers to be used, e.g voicemail or announcement services.
Contact your provider for more information on keypad control.
Activating/deactivating automatic keypad switchover
Pressing '*' and '#' automatically switches the system over to the keypad
protocol. The following dialling codes are transmitted to the exchange as
keypad character sequences. If automatic keypad switchover is deactivated,
dialling '*' and '#' has no effect.
Press or
*
for selection menus.
Select using [  ] and [OK]:
Service Set up
or
Base Set up
o
Settings
o
System
settings
o
Spec.function
o
Dial properties
o
Auto Keypad
.
The activated automatic keypad switchover is highlighted.
Activating the keypad protocol during a call only
This setting only applies to the external call currently in progress.
Press or
*
for the menu.
Select using [  ] and [OK]:
Keypad on?
The activated keypad function is automatically reset when the call is ended.
Activating the keypad protocol for the next connection
You can switch to the keypad protocol for the duration of the next call.
Press or
*
for selection menus.
Select using [  ] and [OK]:
Service Set up
or
Base Set up
o
Call preparat.
o
Temp.Keypad
(
'
before menu item = ON / no = OFF).
Activating/deactivating the dialling of * and #
This function is important for using telecom features, e.g. querying an
answering machine in the telecom network.
Switch on:
Press or
*
for selection menus.
Select using [  ] and [OK]: Service Set up or Base Set up
o
Settings
o
System
settings
o
Spec.function
o
Dial properties
o
Dial * and #
(
'
before menu
item = ON / no = OFF).
Activated dialling of * and # is highlighted.
Deactivate
Press or
*
for selection menus.
Select using [  ] and [OK]: Service Set up or Base Set up
o
Settings
o
System
settings
o
Spec.function
o
Dial properties
o
Auto Sw.to Tone (
'
before
menu item = ON / no = OFF).
Auto Sw.to Tone is highlighted.
1.
2.
1.
2.
1.
2.
1.
2.
1.
2.