Siemens 4075, Руководство по эксплуатации

Страница: 31 / 92

31
Gigaset 4070/4075isdn, Domestic, A31008-G3070-B001-53-
Komfortabel.fm 5.7.01
Step
by
Step
Ring delay
Using the ring delay feature you can configure a handset for each individual
incoming MSN to delay response to the call signal. However, during this ring
delay time the handset can accept the call using the “
Accept? ” function
without a call signal queuing. When this feature is being configured, the time
allowed by the answering machine for recording a message (default:
Automatisch 2/4) must be taken into account. When the ring delay that has
been set is higher than the setting on the active answering machine, there is
no call signal as the answering machine accepts the call beforehand.
Setting ring delay
Press or
*
for selection menus.
Select using [  ] and [OK]:
Service Set up or Base set up
o
Settings
o
Set up
user
o
Set up device
.
Select using [  ] and [
9
]:
(required internal subscriber)
.
Select using [  ] and [OK]:
Ring delay
.
Select using [  ] and [
9
]:
(required MSN)
.
Set
No. of Rings
using [ - ], = off.
Picking up calls during ring delay
A call is coming through to the assigned MSN.
Press the
#
key, the following appears in the display:
Accept?
Press the softkey
YES
. You can then answer the call.
or Press the softkey
NO
. You can set up your own external or internal call.
Conducting calls with more than one subscriber
Internal enquiry call
You would like to call an internal subscriber during an external call.
Press [INT] or
)
and enter the call number for the second subscriber.
A connection is established with the internal subscriber.
or Press the softkeys: [INT] or
)
o
[LIST].
Select using [  ] and [OK]: (required internal subscriber) .
A connection is established with the internal subscriber.
If the internal subscriber dialled is busy:
Press [BACK]: You are reconnected with the external caller.
The internal subscriber answers the call:
or Toggling: you can switch between call parties with [ Ž ] and [  ].
or Three-way calling: press [CONF.]. This establishes the conference circuit.
1.
2.
3.
4.
5.
6.
1.
2.
3.
3.
1.
1.
2.
3.
3.
3.