Siemens 3AH35-SE Series, Инструкция по эксплуатации

Страница: 45 / 48

45
Table 12: Technical ratings
Item Unit 15.5 kV 27.6 kV 38.0 kV
Lightning impulse withstand voltage
Full wave 1.2/50 µs
Chopped wave 2 µs
1
Chopped wave 3 µs
kV
110
142
----
150
194
----
200
258
----
Power-frequency withstand voltage kV 50 60 80
Rated short-circuit current kA 20/25/31.5/40 20/25 20/25/31.5/40
%dc component % 48 48 48
Rated (making) closing and latching
current
kA 52/65/82/104 52/65 52/65/82/104
Rated duty cycle
Reclosing duty
Non-reclosing duty
---- O-0.3 s-CO-3 min.-CO
O-15 s-CO
O-0.3 s-CO-3 min.-
CO-O-15 s-CO
O-0.3 s-CO-3 min.-CO
O-15 s-CO
Minimum reclosing time
2
s 0.3 0.3 0.3
Rated power frequency Hz 60 60 60
Capacitance switching
Overhead line
Isolated bank
Back-to-back
A
100
400
400 100
400
400 100
250
250
Operating temperature range
Standard
Special
°C -30 to +40
-40 to +40
4
-30 to +40
-40 to +40
4
-30 to +40
-40 to +40
4
Operating mechanism ---- Stored-energy Stored-energy Stored-energy
Closing time ms ≤65 ≤65 ≤70
Opening time by interrupting time
Three cycle
Five cycle
ms ≤38
≤56 ≤38
≤56 ≤38
≤56
Dual trip coils (mechanically and
electrically independent)
---- Optional Optional Optional
Emergency manual trip (externally
operable)
---- Standard Standard Standard
Auxiliary voltages (options)
Close, trip and protection
Vdc
Vac
48/125/250
120/240
3
48/125/250
120/240
3
48/125/250
120/240
3
Interrupting medium ---- Vacuum Vacuum Vacuum
Breaks per pole ---- 1 1 1
Contact gap (stroke)
Vacuum interrupter type
1,200 A
2,000 A
3,000 A
mm
20/25
VSS-17006
7-9
7-9
----
20/25
VS-25008
13-15
13-15
----
31.5/40
VS-15052
7-9
7-9
7-9
VS-25008
13-15
13-15
----
VS-30030
18-22
18-22
(2,500) 18-22
VS-30041
18-22
18-22
18-22
Radio influence voltage (RIV) 1,000 kHz µV ≤500 ≤650 ≤650
Seismic withstand (optional) (ANSI/IEEE
693-2005 high-response spectrum)
g 0.5 0.5 0.5
Footnotes:
1.
Circuit breaker is in closed position.
2.
User must supply external time delay (typically using setting in reclosing relay) to assure the minimum reclose time interval of 0.3 s in accordance with ANSI/IEEE.
3.
For ac tripping supply, capacitor trip is used. If ac trip is used, the ac supply must be from a highly reliable power source (for example, from an uninterruptible power
supply).
4.
Consult factory for -50 °C.