Siemens Nixdorf PCD-4ND Скачать руководство пользователя страница 66

Страница: 66 / 132

System configuration

Display settings - Video Setup

Display Device

This field is used to specify the display device.

LCD

Just the notebook's internal display is used (default).

CRT

Just the external display is used.

LCD&CRT

The notebook's internal display and the external display are used.
The DSTN color display does not allow this setting.

Reverse Video

This field is only displayed if your notebook is fitted with a monochrome or DSTN
color display.
You specify whether, and how, reverse video is to be used.

Disable

Produces dark characters on a light background (default).

Text Only

Light characters on a dark background in text mode.

Text&Graphics

Light characters on a dark background in text and graphics modes.

Expanded Mode

This field controls the on-screen image size in video modes that drive less than 480
lines.

Disable

400 lines are centered vertically on the display.

Enable

The video output is expanded to fill the full available screen area
(default).

External Monitor:

With this field you can select the refresh rate for the external monitor. It appears
only at PCD 5ND.

VGA

The external monitor has a refresh rate of 60 Hz. (default entry)

Enhanced

The external monitor has a refresh rate of 70 Hz.

A26391-K64-Z100-2-7619

Содержание PCD-4ND





































































































































Результаты поиска

Содержание PCD-4ND

Отзывы:

Siemens Nixdorf PCD-4ND, Руководство по эксплуатации, Страница: 66 / 132

Результаты поиска

Содержание PCD-4ND

Отзывы: