manualshive.com logo in svg

Siemens Nixdorf PCD-4ND, Руководство по эксплуатации, Страница: 105 / 132

Поделиться
Скачать
Siemens Nixdorf PCD-4ND Скачать руководство пользователя страница 105

 Troubleshooting

On-screen error messages

This section describes the error messages displayed by the system BIOS. Error
messages displayed by the operating system or programs are described in the
relevant manuals.

Diskette read failure - press F1 to retry boot

The system disk is defective.

  Insert a working system disk.

  Press the function key  

F1

 .

Incorrect diskette, insert the utility diskette.

Press ENTER key after ready to backup.

The password cannot be saved to the disk you have inserted.

  Insert the disk 

System Utilities

.

  Press the Enter key.

No boot device available - press F1 to retry boot

The operating system will not load because the hard disk is not connected is
has failed.

The operating system can be loaded from drive A: or from a PCMCIA card.
Which, depends on whether 

Boot Device

 is set to

 Floppy Drive

 or

 PCMCIA

 in

System Setup

.

If the notebook is connected to a docking unit with floppy disk drive, the
operating system cannot be loaded from a PCMCIA card. If you wish to boot
from drive A:, the 

Diskette Boot

 setting has to be changed to 

Internal

 or

External

.

  Insert a system disk or a bootable PCMCIA card.

  Press the function key  

F1

 .

A26391-K64-Z100-2-7619

 

95

Содержание PCD-4ND





































































































































Отзывы:

Нет отзывов