Operation The
battery
Connecting the auto adapter
You can use the auto adapter to charge your notebook's battery if the car has a
12V electrical system.
Switch the notebook off.
Place the notebook on a level, stable surface.
2
1
a
Connect the auto adapter's cord to the notebook's DC input (1).
Start the car's engine.
!
You should only use the auto adapter while the car's engine is running.
You must not start the car's engine while the auto adapter is connected to
the car's electrical system.
Ensure that the area within 100 mm of the notebook is kept clear.
When in operation, the autoadapter must be free-standing and may not be
covered. Do not stand the autoadapter on heat-sensitive material.
The ventilation slots in the notebook must not be covered.
Insert the auto adapter's input connector to the car's cigarette lighter (2).
After a few seconds the notebook's BATTERY LED (a) lights up. The battery
begins to charge.
!
Switch off the notebook before you disconnect it from the auto adapter.
40
A26391-K64-Z100-2-7619
