Siemens Nixdorf PCD-4ND Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 132

Siemens Nixdorf PCD-4ND Скачать руководство пользователя страница 14

Important notes

– Please ensure that no objects (e.g., necklaces, paperclips etc.) or liquids can

get into the interior of the device (electrical shock, short circuit).

– In emergencies (e.g. damaged casing, elements or cables, penetration of liquids

or foreign matter), switch off the notebook immediately, remove the power
connector, remove the battery, and contact your sales office or customer
service.

– Only qualified technicians may repair the device. Unauthorized opening or

incorrect repair may greatly endanger the user (electric shock, fire risk).

– When cleaning the system unit, observe the relevant notes in the chapter

"Operation".

– Install only system expansions that satisfy the requirements and rules governing

safety and electromagnetic compatibility and relating to telecommunications
terminal equipment. If you install other expansions, you may damage the
system or violate the safety regulations and regulations governing RFI
suppression. Information on which system expansions are suitable can be
obtained from the customer service or your sales office.

– You may use the battery only for this PC.

Take care not to drop the battery or otherwise damage its housing (risk of fire).
If the battery fails, do not use it in the notebook.
Never interconnect the positive and negative terminals of the battery.
Used batteries must be disposed of in accordance with local regulations (special
refuse).

– If the LCD display is damaged (e.g. glass broken), do not allow any escaping

liquid to come into contact with skin, mucous membranes (eyes, mouth). Do not
inhale vapors.
Clean parts of the body and clothing that have already come into contact with
such liquids with plenty of water and soap.

– The warranty expires if the notebook is damaged during the installation or

replacement of system expansions.

– You may set only those resolutions and refresh rates specified in the chapter

"System specifications" or in the operating manual of the monitor description.
Otherwise you may damage your monitor. If you are in any doubt, contact your
sales office or customer service.

– The notebook includes a lithium battery which may be replaced only by

authorized personnel. Incorrect handling may lead to a risk of explosion.
The lithium battery may be replaced only with an identical battery or with a type
recommended by the manufacturer. The battery must be disposed of in
accordance with local regulations concerning special waste.

4

A26391-K64-Z100-2-7619

«
...
12
13
14
15
16
...
»

Содержание PCD-4ND





































































































































Отзывы:

Нет отзывов