Security
Settings in BIOS Setup
Write protection for floppy disk drive - Diskette Write
This field is used to enable and disable floppy disk write-protection.
Enabled
Floppy disks can be read, written or deleted, provided switch 4 on
the switch block is set to OPEN (default entry).
Disabled
Floppy disks can only be read.
Write protection for System BIOS - Flash Write
This field can assign write protection to the System BIOS.
Enabled
The System BIOS can be written to or deleted, provided switch 3
on the switch block is set to OPEN (default entry).
Disabled
The System BIOS can neither be written to nor deleted.
Soft Power Off
This field specifies whether the PC can be switched off with a program (e.g.
SWOFF
).
Enabled
The PC can be switched off with a program (default entry).
Disabled
The PC cannot be switched off with a program.
Remote Power On
specifies whether the PC can be switched on from an external device (e.g. fax).
Enabled
The PC can be switched on from an external device (default entry).
Disabled
The PC cannot be switched on from an external device.
A26361-D842-Z120-6-7619
29
Settings in BIOS Setup Power
Setting energy saving functions - Power menu
Programs for power management (e.g.
POWER.EXE
) can change the settings for
the energy saving functions.
You can set the following functions in the
Power
menu:
– Enabling of APM interface (in the
Advanced Power Management
field)
– Extent of energy saving functions (in the
Power Management Mode
field)
– Standby mode (in the
Standby Timeout
field)
– Hard disk energy saving functions (in the
Hard Disk Timeout
field)
– Processor speed in standby mode (in the
Standby CPU Speed
field)
– Terminate energy saving functions (in the
Wakeup Event
field)
Phoenix BIOS Setup Copyright 1985-94 Phoenix Technologies Ltd.
Main Advanced Security
Power
Exit
Item Specific Help
APM [Enabled] –––––––––––––––––––––––
Power Management Mode [Customize]
Standby Timeout: [15 min]
Hard Disk Timeout: [15 min]
Standby CPU Speed: [Low]
Wakeup Event
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Execute Command F7 Previous Values
Example for submenu
Power
Enabling the APM Interface - APM
Determines whether an operation system can change the power management
settings in the system BIOS.
Enabled
The operating system has access to the power management
settings and can change these if necessary (default entry).
Disabled
Changes can not be made to power management setting by an
operating system.
30
A26361-D842-Z120-6-7619
