Advanced
Settings in BIOS Setup
Reset Configuration Data
This field specifies whether the configuration data is reset and reinitialized when
the PC is started.
YES
When the PC is started the old configuration data is reset and the
entry in this field is set to
NO
. The new configuration data is
determined by means of the Plug&Play functionality. The mounted
modules and drives are then initialized with this data. Components
which are not Plug&Play must be entered manually.
NO
When the PC is started, the Plug&Play functionality ascertains the
current configuration data and uses it to initialize the installed
modules and drives. The configuration data of non-Plug&Play
components is not reset (default entry).
Hard disk access - Large Disk Access Mode
specifies the type of hard disk access for large hard disks (more than 1024
cylinders, 16 heads).
DOS
If the operating system uses MS-DOS-compatible hard disk
accesses. (default entry)
Other
If the operating system uses hard disk accesses which are not
MS-DOS-compatible (e.g. Novell, SCO Unix).
A26361-D842-Z120-6-7619
25
Settings in BIOS Setup Security
Setting up the security features - Menu Security
You can set up the following security features in the
Security
menu:
– Protecting BIOS Setup (in the field marked
Set Setup Password
)
– Protecting BIOS of add-on modules (in the field marked
Set Setup Lock
)
– Protecting system boots (in the field marked
Set System Password
)
– Locking input devices (in the field marked
System Password Mode
)
– Prevention of system boots from floppy disk (in the field marked
System Load
)
– Virus Warning (in the field marked
Virus Warning
)
– Prevention of write operations to floppy disk (in the field marked
Diskette Write
)
– Write protection of System BIOS (in the field marked
Flash Write
)
– Switching off by software (in the field marked
Soft Power Off
)
– Remote Power On (in the field marked
Remote Power On
)
Phoenix BIOS Setup Copyright 1985-94 Phoenix Technologies Ltd.
Main Advanced
Security
Power Exit
Item Specific Help
Setup Password Not installed –––––––––––––––––––––––
System Password Not installed
Set Setup Password: [Press Enter]
Set Setup Lock: [Standard]
Set System Password: [Press Enter]
System Password Mode: [System]
System Load: [Standard]
Setup Prompt: [Enabled]
Virus Warning: [Disabled]
Diskette Write: [Enabled]
Flash Write: [Enabled]
Soft Power Off: [Enabled]
Remote Power On: [Enabled]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Execute Command F7 Previous Values
Setup Password / System Password
This field indicates whether the appropriate password is installed or not.
26
A26361-D842-Z120-6-7619
