Original operating instructions
AEROVITAL
06.2018
19
P3
Humidity control and/or room temperature control
The AEROVITAL vents continuously in basic ventilation mode and automatically switches the air throughput level higher as
soon as the defined values have been exceeded.
• The air throughput level (1 to 4) for the basic ventilation can be freely selected
• The desired room humidity can be set to a value between 30% and 90%.
• The desired room temperature can be set to a value between 10°C and 50°C.
• If only the room humidity should be controlled, the room temperature must be set to 0°C.
• If only the room temperature should be controlled, the room humidity must be set to 0%.
Programming example
The AEROVITAL should provide basic ventilation with air throughput level 2 and automatically increase the air throughput
level when an air humidity of 65% or a temperature of 25°C in the room is exceeded.
Step
Button
(press briefly)
Function
Display
1
P3
hold down
approx. 5
seconds
A flashing value for the room temperature appears in the display.
Factory setting: 0°C
2
or
press briefly or
hold down
The numerical value is increased (
+
) or reduced (
—
) in single
increments
3
P3
A flashing value for the relative air humidity appears in the display.
Factory setting: 55%.
4
or
press briefly or
hold down
The numerical value is increased (
+
) or reduced (
—
) in single
increments
5
P3
A flashing fan symbol appears in the display.
6
or
press briefly or
hold down
The air throughput level for the basic ventilation is increased (
+
) or
reduced (
—
) in single increments
7
P3
The new values are saved (the display flashes 2x briefly).
• The program (P3) will now run with the newly set values.
• The display indicates the current measured values for room temperature and humidity.
• When the P3 button is pressed briefly, the programmed values will be displayed for approx. 3 seconds.
