10
AEROVITAL
Original operating instructions
06.2018
Step 9:
Connecting the cable to the clamping block (only for permanent electrical connection)
1. Remove screws and cover.
2. Connect the cable to the clamping block.
3. Position cover and screw firmly into place.
Note:
Route the cable through the top opening on the
terminal box.
Step 10:
Inserting the blower units
1. Insert the top and bottom blower unit and press lightly
against the contacts.
Note:
The blower units are kept in this position after the
assembly of the front panel.
Round, yellow
sticker
Spring-tensioned
PVC pin
Step 11:
Inserting the foam strips
1. Press the foam strips into the hollow cavity between the
casing and the top blower unit.
Note:
The second foam strip must not project beyond the
front edge of the front panel.
