Siegenia AEROLIFE, Оригинальная инструкция по эксплуатации

Страница: 7 / 24

Original operating instructions AEROLIFE
08.2016 7
On-wall mounting
1. Align the drilling template with a spirit level and
fix into place.
2. Mark four fastening drill holes and core drill hole
on the wall.
Notes:
• The surface must be level (plastered).
• The maximum distance from the outer edge of the
template to the next socket should not exceed 300 mm.
Step 3: Drilling the core hole and mounting holes
1. Drill core hole (ø 120
+3
). Using a hammer drill at an
angle of approx. 2° to 5°, drill a hole through
to the outside wall.
ø120
+3
2. Drill the four marked mounting holes
(all drill holes ø 8 mm, at least 45 mm deep).
3. Insert four S8 dowels (included in delivery) into the
drilled holes.
Note:
depending on the type of wall (e.g. plasterboard),
suitable dowels may need to be provided by the customer for
inserting into the drill holes.
Step 4: Trimming the PVC ventilation pipe
1. Trim pipe according to the formula:
X = Y – 43 mm (on-wall mounting)
X = Y – 118 mm (in-wall mounting)
Y
X
Y
on-wall mounting in-wall mounting