manualshive.com logo in svg

Siegenia AEROLIFE, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Siegenia AEROLIFE Скачать руководство пользователя страница 22

22

AEROLIFE 

Original operating instructions

08.2016

EU Declaration of Conformity

In terms of the EG Directive Electromagnetic Compatibility 2004/108/EC and 2006/42/EC

SIEGENIA-AUBI KG 
Hardware and ventilation technology 
Duisburger Straße 8 
D-57234 Wilnsdorf

declares that the product:

Ventilation unit 

Unit type

AEROLIFE / AEROVITAL 

Designation of type

is compliant with the following standards or normative documents:
EN 55014-1 :2006 
EN 55014-2 :1997+A1 
EN 61000-3-2 :2006 
EN 61000-3-3 :1995+A1,A2 
EN 60335-1 :2010 
EN 60335-2-80 :2003+A1 :2004, EN 62233 :2008 
EN 62233  Br.1 :2008, EN 62233 :2008-11 
EN ISO 12100:2010 
RoHS 2011/65/EU

This declaration is based on test reports from:
EMC TestHaus Dr. Schreiber GmbH - Test protocol 14/317

Siegen, 2014-11-03

S. Bauerdick (site manager)

The technical documents will be provided by SIEGENIA-AUBI KG.

This declaration certifies conformity with the directives cited but does not warrant properties in the legal sense.
The safety instructions in the product documentation supplied must be followed.

Содержание AEROLIFE

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды