34
Preparing the Area of Installation
The monitor support must be installed on the pedal side of the E-MED stretcher. It is recommended to
install the monitor support before putting the stretcher in service.
Installation
Warning
This item must be installed by qualified personnel.
Follow the instructions below to install the monitor support:
•
Grasp the support and insert it into the appropriate holes in the stretcher feet as indicated by the
arrow.
•
Check stability.
Caution
The following check must be repeated regularly in order to verify the perfect working
condition of the article, as described in the “Maintenance” section.
Testing
Before using the article:
•
Check if the article works correctly, with reference to the section in this manual called “Operation
and Use”.
•
If the check is positive, the article is ready for use, otherwise call Sidhil customer service centre
immediately.
Caution
Do not use this item for other purposes than the ones indicated below.
Operation and Use
Warning
Warning
Never exceed the load capacity of the plane.
Be sure that the monitor support is well fixed to the stretcher, otherwise it could cause
an obstruction which may damage the stretcher and injure personnel or patients.
