SICK WL12G-3P3572S12, Руководство по эксплуатации

Страница: 18 / 111

PIN Pin assignment
2 = WH
Q
3 = BU - (M)
4 = BK Q
5 = GY Teach
Digital output:
PNP: Load → M
7 Commissioning
7.1 Alignment
Align the sensor with a suitable reflector. Select the position so that the red emitted
light beam hits the center of the reflector. The sensor must have a clear view of the
reflector. There must be no object in the path of the beam [see
figure 6 ]. You must
ensure that the optical openings of the sensor and reflector are completely clear.
Move transparent film and thread into beam path, distance 60 mm [see figure 7 ].
Figure 6: Alignment 1
Figure 7: Alignment 2
7.2 Check the application conditions
Check the distance between sensor and reflector. There is a max. sensing range of
500 mm with reflector P250F.
7
COMMISSIONING
18 O P E R A T I N G I N S T R U C T I O N S | WL12G-3P3572S12 8027339/1D6C/2021-11-19 | SICK
Subject to change without notice
en