7
8027092/AE00/V1-0/2022-10| SICK
O P E R A T I N G I N S T R U C T I O N S | VISIC100SF
Subject to change without notice
FOR YOUR SAFETY
2
2
For your safety
2.1
Basic safety information
▸
Read and observe these Operating Instructions.
▸
Observe all safety information.
Correct use
▸
Only use the measuring device as described in “Intended use”. The manufacturer
assumes no responsibility for any other use.
▸
Maintenance work should be performed as prescribed in this Manual.
▸
Do not perform any work or repairs on the measuring device not described in this
Manual.
▸
Do not remove, add or modify any components to or on the device unless described and
specified in the official manufacturer information.
▸
Use only original spare parts and wear and tear parts from SICK.
Failure to observe these precautions could result in:
●
Voiding the manufacturer's warranty.
●
Causing the device to become dangerous.
Special local conditions
In addition to the information in these Operating Instructions, follow all local laws, technical
rules and company-internal operating and installation directives applicable wherever the
device is installed.
Retention of documents
These Operating Instructions:
▸
Must be available for reference.
▸
Must be conveyed to new owners.
Ensure the operational safety during all work on the device
The VISIC100SF is mainly used in combination with regulation and control technology.
▸
During all work on the device, ensure that this can not lead to hazards or hindrances for
traffic.
2.1.1
Electrical safety
Hazard through electrical shock
There is a risk of electric shock when working on the measuring device with the voltage
supply switched on.
●
Before starting work on the measuring device, ensure the power supply can be switched
off using a power isolating switch or circuit breaker in accordance with the valid
standard.
●
Switch off the power supply before carrying out any work on the measuring device.
●
After completion of the work or for test purposes or adjustment, the power supply may
only be activated again by authorized personnel complying with the safety regulations.
