manualshive.com logo in svg

SICK UE4155 PROFIsafe, Руководство по эксплуатации, Страница: 45 / 84

Поделиться
Скачать
SICK UE4155 PROFIsafe Скачать руководство пользователя страница 45

Operating Instructions

Chapter 

8

UE4155

8010178/TF82/2010-03-05

© SICK AG • Industrial Safety Systems • Germany • All rights reserved

45

Subject to change without notice

Configuration

If the device on the SDL connection needs data from the bus node or from the FPLC, but
the bus node has not yet been finally configured, the device can report an error on the
SDL connection. If necessary, you should give priority to configuring the bus node or pro-
gramming the FPLC in order to test the configuration of the device on the SDL connec-
tion.
The UE4155 bus node monitors the configuration of the devices on the SDL connection.
If you reconfigure or exchange this, then you should …

– modify the configuration of the bus node, if necessary, and
– at least transfer the configuration to the bus node once more.

In the event of an error message from a device on the SDL connection, always also read
the diagnostics data of the bus node. This will provide additional information for resolving
the error.

8.6

 

Setting the PROFIsafe address

In order for you to operate the bus node as a PROFIsafe user, this must have a PROFIsafe
address. The PROFIsafe address must correspond to the appropriate setting in the FPLC
hardware-configuration program.

You can set the PROFIsafe address in the bus node as follows:

Start the hardware-configuration program.
In the PROFIBUS configuration of the bus node, read the value of parameter

F_Dest_Add

 (cf. Tab. 11 on page 41).

Transfer the value you have read as the PROFIsafe address to the bus-node configura-
tion with the aid of the CDS.
Device symbol 

UE4100 PROFIsafe

, context menu 

Configuration draft

,

Edit

, file card

General

, option 

PROFIsafe address (F_Dest_Add)

.

8.7

 

Configuration of the bus-node inputs and outputs

Configure the field-signal and SDL connections as planned with the aid of the CDS.
Chapter 3.5 “Configurable functions” on page 16 as well as the online help on the CDS
contain detailed information on the interaction of the individual settings.
Device symbol 

UE4100 PROFIsafe

, context menu 

Configuration draft

,

Edit

, file card

I/O

 of the corresponding field-signal connection.

Transfer the configuration to the bus node as described in the CDS online help.
If necessary, remove the connector from the configuration connection when you have
concluded the configuration.
Screw the device’s protection cap back onto the device after you have finished
configuring it. The bus node will otherwise no longer comply with enclosure rating.

Notes

Notes

Содержание UE4155 PROFIsafe





















































































Отзывы:

Нет отзывов