6
COMMISSIONING
62
8027439/V1-0/2022-02|SICK
A D D E N D U M T O O P E R A T I N G I N S T R U C T I O N S | Track and trace cabinet TTC100-2
Subject to change without notice
6.2.8
Opening the configuration interface
The connection between the SOPAS project and controller makes it possible to
subsequently read controller parameters and configuration data in the SOPAS project or
write these to the controller from SOPAS.
During the initial commissioning, the standard parameters saved on the controller at the
factory are transferred to the SOPAS project and then adapted to the requirements of the
relevant application there.
▸
Click
Offline
in the tile.
▸
Synchronize the controller’s device data with the device data of the SOPAS project.
To do this, click on
Read parameters
.
▸
The standard parameters are transmitted from the controller into the SOPAS project.
These parameters are then adapted to the customer requirements in SOPAS.
▸
Online
appears in the tile. The LED lights up green.
Setting the controller
to online
