SICK TiM8P Series, Руководство по эксплуатации

Страница: 28 / 42

6.4.1 TiMxxxP-21xxxxx
“Power/I/O” connection
3
1
7
2
6
5
4
8
9
10
12
11
Table 5: Male connector, M12, 12-pin, A-coded
Pin Signal Function Wire colors for connecting
cable part no. 6054974
(5 m), 6054973 (10 m),
6054972 (20 m)
1)
1 GND Ground Blue
2 DC 9 V ... 28 V Supply voltage Brown
3 IN 1 Switching input 1 Red
4 IN 2 Switching input 2 Green
5 OUT 1 Switching output 1 Pink
6 OUT 2 Switching output 2 Yellow
7 OUT 3 Switching output 3 Black
8 OUT 4 Switching output 4 Gray
9 INGND Common ground for all inputs White
10 IN 3 Switching input 3 Violet
11 IN 4 Switching input 4 Gray + pink
12 – Reserved, do not wire this PIN! Red + blue
– – Screen –
1) Example values when using the specified connecting cable(s). Signal assignment and wire colors can
vary when using other connecting cables.
"Ethernet" connection
1
4 3
2
Table 6: Female connector, 4-pin, D-coded
Contact Labeling Description
1 TX+
2 RX+ R
3 TX- Sender-
4 RX- Receiver-
6.4.2 USB interface
The Ethernet interface is recommended as a communication interface.
If using the USB interface, please note:
• Use a high-speed UBS cable, maximum length of cable 3 m.
• The connection may be interrupted due to ESD/EMC influences. If necessary:
Disconnect USB cable from the device, then reconnect it.
6
ELECTRICAL INSTALLATION
28 O P E R A T I N G I N S T R U C T I O N S | TiM8xxP 8024355/1DRC/2021-12-15 | SICK
Subject to change without notice