6.5.3
Wiring of digital output DEVICE READY
NOTICE
With NPN wiring, the digital output is already activated during the device initialization
phase.
The output is based on push-pull (PNP/NPN) and is not electrically isolated from the
supply voltage. The default configuration is PNP, which is active low.
+
-
PNP
+
-
NPN
Figure 10: Connection example, digital output
TiM2xx
V
S
= DC 10 V ... 28 V
DEVICE
READY
2
5
GND
V
out
Figure 11: Structure and wiring principle of digital output DEVICE READY (pin 2)
For inductive load: Quenching circuit - Install an anti-surge diode directly at the load in
default active low configuration.
ELECTRICAL INSTALLATION
6
8025019/190A/2020-08 | SICK
O P E R A T I N G I N S T R U C T I O N S | TiM2xx
23
Subject to change without notice
