SICK SureSense HL18G, Руководство по эксплуатации

Страница: 2 / 64

Photoelectric retro-reflective sensor
Operating instructions
1 Safety notes
■
Read the operating instructions before commissioning.
■
Connection, mounting, and setting may only be performed by trained specialists.
■
Not a safety component in accordance with the EU Machinery Directive.
■
When commissioning, protect the device from moisture and contamination.
■
These operating instructions contain information required during the life cycle of
the sensor.
2 Correct use
The HL18G/T is an opto-electronic photoelectric retro-reflective sensor (referred to as
"sensor" in the following) for the optical, non-contact detection of objects, animals, and
persons. A reflector is required for this product to function. If the product is used for any
other purpose or modified in any way, any warranty claim against SICK AG shall become
void.
Photoelectric retro-reflective sensor with optional add-on for detecting transparent ob‐
jects (HLxxG-xxxx).
The HL18G/T sensor complies with the Radio Safety Requirements (EMC) for the in‐
dustrial sector (Radio Safety Class A). It may cause radio interference if used in a resi‐
dential area.
Image: A
3 Commissioning
1 Adjust the distance between the sensor and the reflector according to the corre‐
sponding diagram [H] (x = sensing range, y = operating reserve).
8017852 | SICK
Subject to change without notice 1