1
About this document
1.1
Function of this document
These Operating Instructions describe:
•
Device components
•
Installation
•
Operation
•
Maintenance work required for reliable operation
1.2
Target group
This document is addressed to technicians (persons with technical understanding)
installing, operating and maintaining the measuring system.
Responsibility of the operator
•
Use the device only as described in these Operating Instructions. The manufac‐
turer assumes no responsibility for any other use.
•
Maintenance work should be performed as prescribed in this Manual.
•
Do not remove, add or change any components in or on the device unless such
changes are officially allowed and specified by the manufacturer.
°
Otherwise the manufacturer's warranty becomes void.
°
Otherwise the device can become dangerous.
•
Observe special local conditions.
°
Follow all local laws, regulations, and company policies applicable at the
installation location.
•
Retain documents. These Operating Instructions:
°
Must be kept available for reference.
°
Must be passed on to new owners.
Requirements on the maintenance personnel
•
The technician must be familiar with the exhaust gas technology of the operator's
plant (overpressure, toxic and hot flue gases) and be able to avoid hazards when
working on gas ducts.
•
The technician must be familiar with handling compressed gas cylinders (span
gases).
•
The technician must be able to avoid hazards caused by noxious span gases.
•
The technician must be familiar with gas lines (PTFE lines) and their screw fittings
(be able to ensure gas-tight connections).
•
Only electricians are permitted to work on the electrical system or electrical sub‐
assemblies.
1.3
Symbols and document conventions
1.3.1
Warning symbols
Symbol
Significance
Hazard (general)
Hazard by voltage
ABOUT THIS DOCUMENT
1
8023849/14SF/V1-1/2019-07 | SICK
O P E R A T I N G I N S T R U C T I O N S | SFU
5
Subject to change without notice
