1
Rotary handle
2
Mounting bracket
3
Pressure disk (covered)
2.
Swing the mounting bracket to the right.
WARNING
Risk of burns on hot surfaces
The filter element can reach high temperatures in operation.
b
Wear suitable gloves.
b
Provide a heat-resistant support.
CAUTION
Risk of injury due to high weight
b
Do not drop the filter cover.
3.
Pull the filter cover out using the rotary handle.
4.
If the filter cover is hot: Place the filter cover on a heat-resistant mat.
5.
Remove the sintered metal filter element.
1
Sintered metal filter element
2
Filter housing
6.
Pull out the bottom flat seal with a hook.
7.
Insert new bottom flat seal.
5
MAINTENANCE
30
O P E R A T I N G I N S T R U C T I O N S | SFU
8023849/14SF/V1-1/2019-07 | SICK
Subject to change without notice
