SICK NAV350 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 70

background image

For your safety

12

© SICK AG · Germany · All rights reserved · Subject to change without notice

8013889/ZML0/2017-06-09

Operating Instructions

NAV350 Laser positioning sensor

Chapter

2

2.3

General safety notes and protective measures

Safety notes

Please observe the following items in order to ensure the correct and safe use of the
NAV350.

•

The notices in these operating instructions (e.g. on use, mounting, installation or inte-
gration into the existing machine controller) must be observed.

•

When operating the NAV350, the national, local and statutory rules and regulations
must be observed.

•

National/international rules and regulations apply to the installation, commissioning,
use and periodic technical inspections of the NAV350, in particular
– the work safety regulations/safety rules
– other relevant health and safety regulations.

•

Manufacturers and operators of the machine/system on which the NAV350 is installed
are responsible for obtaining and observing all applicable safety regulations and rules.

•

The tests must be carried out by specialist personnel or specially qualified and author-
ised personnel and must be recorded and documented to ensure that the tests can be
reconstructed and retraced at any time.

•

The operating instructions must be made available to the operator of the system where
the NAV350 is used. The operator of the system is to be instructed in the use of the de-
vice by specialist personnel and must be instructed to read the operating instructions.

•

The NAV350 is not a device for the protection of people in the context of the related
safety standards for machinery.

2.3.1

Electrical installation work

•

Only authorised personnel are allowed to perform the electrical installation work.

•

Only make and disconnect electrical connections when the device is electrically isolat-
ed.

•

Select and implement wire cross-sections and their correct fuse protection as per the
applicable standards.



Do not open the housing.



Observe the current safety regulations when working on electrical systems.

«
...
10
11
12
13
14
...
»

Содержание NAV350







































































Отзывы:

Нет отзывов

Похожие инструкции для NAV350

Бренд: Ranger design Страницы: 6

Бренд: Happy Orange Страницы: 2

Бренд: Panasonic Страницы: 289

Бренд: Fantasea Страницы: 18

Бренд: Fantasea Страницы: 15

Бренд: KDS Страницы: 72

Бренд: Valor Страницы: 72

Бренд: Harol Страницы: 17

Бренд: Cab Technology Страницы: 10

urban iki Junior

Бренд: OGK Страницы: 62

Бренд: pleasant hearth Страницы: 6

Бренд: R&G Страницы: 12

Бренд: Datalogic Страницы: 5

AquaSensors AnalogPlus 1.0

Бренд: Thermo Scientific Страницы: 24

Бренд: Hartan Страницы: 86

Easyrack 6622520 01 01

Бренд: hepco & becker Страницы: 4

Бренд: Beurer Страницы: 24

Бренд: inventum Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды