9.
To add a new module, double-click on the desired module in the
Catalog
. Alterna‐
tively, use drag and drop to drag the desired module into
Device overview
.
10. Click on the module (e.g., mS3 6Byte In/Out…)
11.
Properties
>
General
>
PROFIsafe
12. Enter the
F_Dest_Add
and, if applicable,
F_iPar_CRC
F_WD_Time
. The entered values
must match the values configured in Safety Designer.
13. If applicable, enter the
f_WD_Time
.
see "Overview of the PROFIsafe parameters", page 11
INTEGRATION
2
8026545/2021-03-15 | SICK
T E C H N I C A L I N F O R M A T I O N | microScan3 - PROFINET
9
Subject to change without notice
