Addressing the bits in the controller
The bits of the process images can be accessed in the logic using the following
scheme:
Ix.x
and
Qx.x
. The start byte (byte 0) is relative to the specified
Start address
.
If
Start address
is set to the value 17, then the output bit 0.0 in the logic can be
accessed as
Q17.0
. The input bit 3.1 then corresponds to
I20.1
.
OVERVIEW OF THE PROCESS IMAGES
4
8026545/2021-03-15 | SICK
T E C H N I C A L I N F O R M A T I O N | microScan3 - PROFINET
15
Subject to change without notice
