SICK IOLG2PN-03208R01-PROFINET Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 50

SICK IOLG2PN-03208R01-PROFINET Скачать руководство пользователя страница 24

Operating instructions IO-Link Master IOLG2PN-03208R01 – PROFINET

System integration and configuration

24

© SICK AG • Presence Detection • Subject to change without notice • 8018665.10RD

Configuration

The IO-Link modules and the standard I/O modules must be configured

consistent with the configurations of the top module.
If needed these can be moved from the hardware catalog using Drag &

Drop in the configuration table. All ports are configured as standard I/O

ports at the factory.
If you want to configure the port as a IO-Link port, you must delete the mod-

ule and replace with an IO-Link module.

Addressing modules

By selecting the IO-Link modules you can select I/O addresses in the menu

tree and thus change the addresses.

Configuring IO-Link modules

Corresponding to the process data length of the IO-Link device you must

select a matching IO-Link module in the catalog and move it to the corre-

sponding slot per Drag & Drop.
Refer to the documentation for the IO-Link device for the required process

data lengths of the IO-Link device.

«
...
22
23
24
25
26
...
»

Содержание IOLG2PN-03208R01-PROFINET



















































Отзывы:

Нет отзывов