SICK Dx35 Скачать руководство пользователя страница 9

Страница: 9 / 68

8014868/YEF7/2014-09-02 • © SICK AG • Subject to change without notice 9

Operating instructions Distance sensors Dx35

General information

Tips and recommendations

NOTE

… highlights useful tips and recommendations as well as

information for efficient and trouble-free operation.

1.3

Limitation of liability

Applicable standards and regulations, the latest state of technological

development and many years of knowledge and experience have all been
taken into account when assembling the data and information contained in
these operating instructions.

The manufacturer accepts no liability for damage caused by:

• Failing to observe the operating instructions

• Incorrect use

• Use by untrained personnel

• Unauthorized conversions

•

Technical modifications

• Use of unauthorized spare parts/consumable parts.

With special variants, where extras have been ordered, or owing to the lat

est technical changes, the actual delivery may vary from the features and

illustrations shown here.

1.4

Scope of delivery

The scope of delivery includes the following:

•

DS35, DT35, DL35, or DR35 distance sensor

(

→

For type code, see Page 15, Chapter 3.2)

• Optional: Accessories (

→

Page 60, Chapter 14)

Supplied documentation:

• Quick start guide

1.5

Customer service

Do not hesitate to contact our customer service should you require any
technical information.

Please refer to the back page of these operating instructions for your
agent's contact details.

NOTE

Before calling, make a note of all type label data such as

type code, serial number, etc. to ensure faster process-

ing.

Содержание Dx35





































































Результаты поиска

Содержание Dx35

Отзывы:

Похожие инструкции для Dx35

Бренды по названию

Популярные бренды

SICK Dx35, Руководство по эксплуатации

Результаты поиска

Содержание Dx35

Отзывы:

Похожие инструкции для Dx35

Бренды по названию

Популярные бренды