lower torques are not secure enough to prevent the multiple light beam safety
device from moving.
$
2,5 Nm -
3 Nm
5 Nm -
6 Nm
b
Make sure that the sender and receiver are aligned correctly. The optical lens sys‐
tems of the sender and the receiver must be located opposite one another (
%
).
%
b
If necessary, use a spirit level to check that the components are parallel (
&
).
&
Further topics
•
"Sender and receiver alignment", page 40
•
"Minimum distance from the hazardous point", page 15
•
"Minimum distance from reflective surfaces", page 17
•
"Alignment with the QuickFix bracket", page 42
•
"Alignment with the FlexFix bracket or with the upgrade bracket", page 43
5
MOUNTING
30
O P E R A T I N G I N S T R U C T I O N S | deTem4 Core
8020453/14Q7/2020-04-27 | SICK
Subject to change without notice
