manualshive.com logo in svg

SICK CLV61 DualPort Series, Руководство по эксплуатации

Поделиться
Скачать
SICK CLV61 DualPort Series Скачать руководство пользователя страница 9

WARNING
Danger due to improper use!

Any improper use can result in dangerous situations.
Therefore, observe the following information:

■

Product should be used only in accordance with its intended use.

■

All information in these operating instructions must be strictly observed.

■

Shut down the product immediately in case of damage.

2.3

Cybersecurity

To protect against cybersecurity threats, it is necessary to continuously monitor and
maintain a comprehensive and holistic cybersecurity concept. A suitable concept com‐
prises organizational, technical, procedural, electronic, and physical levels of defense
and provides suitable measures for different types of risks. SICK's products and solu‐
tions must be viewed as a component of this concept.

Information on Cybersecurity can be found at: 

www.sick.com/psirt 

.

2.4

Limitation of liability

Relevant standards and regulations, the latest technological developments, and our
many years of knowledge and experience have all been taken into account when
compiling the data and information contained in these operating instructions. The
manufacturer accepts no liability for damage caused by:

■

Non-adherence to the product documentation (e.g., operating instructions)

■

Incorrect use

■

Use of untrained staff

■

Unauthorized conversions or repair

■

Technical modifications

■

Use of unauthorized spare parts, consumables, and accessories

2.5

Modifications and conversions

NOTICE

Modifications and conversions to the device may result in unforeseeable dangers.

Interrupting or modifying the device or SICK software will invalidate any warranty claims
against SICK AG. This applies in particular to opening the housing, even as part of
mounting and electrical installation.

2.6

Requirements for skilled persons and operating personnel

WARNING
Risk of injury due to insufficient training.

Improper handling of the device may result in considerable personal injury and material
damage.

■

All work must only ever be carried out by the stipulated persons.

The following qualifications are required for various activities:

SAFETY INFORMATION 

2

8017840/19OF/2021-10-28 | SICK

O P E R A T I N G   I N S T R U C T I O N S | CLV61x

9

Subject to change without notice

Содержание CLV61 DualPort Series



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды