User group
Password
Authorizations in Safety
Designer
Authorizations in the
Safety Assistant app
Administrator
The password SICK‐
SAFE is created at the
factory.
b
Change this
password to pro‐
tect the device
against unautho‐
rized access.
•
May read configuration
from the device.
•
May transfer verified
and unverified configu‐
ration to the device.
•
May verify configura‐
tion.
•
Resetting whole device
to factory settings
allowed.
•
Activating and deacti‐
vating the
Maintenance
personnel
and
Authorized
client
user groups is
allowed.
•
Change own password
allowed.
•
Changing the pass‐
words of the
Mainte‐
nance personnel
and
Authorized client
user
groups is allowed.
•
May read configuration
from the device.
•
May transfer verified
configuration to the
device.
•
Activating and deacti‐
vating the
Maintenance
personnel
,
Authorized
client
and
SICK service
user groups is allowed.
•
Change own password
allowed.
•
Changing the pass‐
words of the
Mainte‐
nance personnel
and
Authorized client
user
groups is allowed.
NOTICE
If you change passwords with the Safety Assistant app with a voltage-free device and
using the default password (delivery state), unauthorized persons must be prevented
from accessing the contents of the NFC tag.
This is relevant until the sensor is commissioned. When the voltage supply is active,
the new passwords are adopted by the device and the contents of the NFC tag are
overwritten.
7.3
Introduction to the Safety Designer
The safe multibeam scanner is configured using Safety Designer.
This section describes the user interface of Safety Designer. For more information on
the Safety Designer, see the operating instructions for the Safety Designer, part no.
8018178.
CONFIGURATION
7
8025936/2021-01-08 | SICK
O P E R A T I N G I N S T R U C T I O N S | scanGrid2 I/O
43
Subject to change without notice
