Sices GC310, Руководство по эксплуатации и обслуживанию

Страница: 29 / 33

29
Use and maintenance Manual AUTOMATIC GENSET CONTROL PANEL with GC310/GC350
In order to shorten the intervention time of the SICES Technical Assistance (SAT), please
follow the procedure below shown, providing the required data so as to allow an easy
problem solving.
Try to identify the origin of the fault by consulting the table above;
Contact SICES Technical Assistance SAT having the following information at your fingertips:
1) Control Panel data as shown in the label on the carpentry (**)
2) Purchasing document data (invoice);
3) Name of the Company that purchased the panel;
4) Description of the fault, giving as much details as possible about the probable cause, wrong
operations or improper use;
(**)
It is essential to refer the Control Panel serial number. If you have already identified the component
considered faulty, it is useful to refer the writing you find on it.
The warranty conditions are indicated in the document
GENERAL CONDITIONS OF SALE and it is
reminded that the warranty does not comply with the following cases:
- For any damages during the transport.
- For any faults due to improper installation and/or start-up not responding to the safety rules
in force.
- For any improper use different from the one given by the instructions provided.
- For any modifications or changes performed without authorization.
- For damages due to atmospheric agents or overvoltage of different origins.
- For the use of non-original spare parts or with different characteristics from the original.
- For any extraordinary events.
Note:
Do not wait until the components are worn out. Replacing a component means improving the
efficiency of the control panel and avoiding more serious damages too.