SICCO V 1880-04, Руководство по эксплуатации

Страница: 12 / 20

SICCO Vacuum-Desiccators
12
6. Disturbances / Repairs
The following information to clear possible disturbances shall help you to recognize or to eliminate
possible reasons for the disturbances by yourselves. Should there be a disturbance you cannot handle,
please do not hesitate to contact us. Of course we will try to help you in this way. If then we do not find a
solution to your problem, we ask you to return the cleaned desiccator into the original packing to us. Then
we will check if a cost-effective repair is possible.
Objection Reason and help
» The door is not closed tightly.
Close the door and lock all latches.
» Check the circular silicone seal for damages. If necessary,
renew the silicone seal.
» The valve for evacuation (1) which is connected to the pump is
not open.
Open the valve (1).
» The valve for ventilation (2) is still open.
Close the valve (2).
» Check your connectors, hose and pump for leakages.
Seal the leakages. Renew the hose.
» Exchange it as follows:
(You can use all vacuum gauges with G ¼“threads)
The air pressure inside the
desiccator does not decrease.
The vacuum gauge is
defective
» Remove the defective vacuum gauge by turning counterclockwise
Attention: Do not damage the vacuum gauge by turning too
using a fork wrench size 14.
strong.
» Screw the new vacuum gauge into the desiccator by turning
Attention: Do not damage the vacuum gauge by turning too
» Apply a suitable adhesive on the thread.
clockwise using a fork wrench size 14.
strong.
7. Waste disposal
The SICCO vacuum desiccators as well as the packing consist of recyclable materials. Please take further
information about the materials used from the following specifications.