② Go to Config
Network Config
IP Address menu to modify the IP address.
IP Setup
③ Go to the router’s management interface through IE browser to forward the IP
address and port of the camera. Login to the router by typing in the default gateway
address into the web address bar of the browser (ex. http://192.168.1.1). Navigate to
the Port forwarding, Virtual Server, Custom service, or Pinhole section in the router.
Router Setup
④ Open the IE browser and input its WAN IP and HTTP port to access. You can find
the WAN IP address under the router status page. It is also called the “Internet IP
address.”
➢
Access through PPPoE dial-up
Network connection
You may access the camera through PPPoE auto dial-up. The setting steps are as follow:
① Go to Config
Network Config
Port menu to set the port number.