1.1.2
Directly Access through IE
The default network settings are as shown below:
IP address:
192.168.226.201
Subnet Mask:
255.255.255.0
Gateway:
192.168.226.1
HTTP:
80
Data port:
9008
You may use the above default settings when you log in the camera for the first time. You may
directly connect the camera to the computer through a network cable.
① Manually set the IP address of the PC. The network segment should be as the same
as the default settings of the IP camera. Open Network and Sharing Center in Windows
Control Panel. Click “Change adapter settings,” Right-click “Local Area Connection”
and choose Properties, Left-click on “Internet Protocol TCP/IP v4,” and click the
properties button.
Select “Use the following IP address” and manually enter the following information:
IP address: 192.168.226.4
Subnet Mask: 255.255.255.0