Week schedule
You can set an alarm schedule for any day of the week, Monday to Sunday.
Add: Add a special day to the schedule.
Erase: Delete holiday schedule.
Day schedule
You can set the alarm time for a holiday or special circumstance.
1. Select a date at the “Date” pull-down list, press “Add” button to add that date to the list box
on the right side and then move the scroll bar to set the schedule of that day.
2. Select a date in the list box on the right side, and press “Erase” to remove the schedule on
that day.
Press the “Save” button to save the settings.
Note: Holiday schedule is a priority to Week schedule.
3.3.4
Alarm Server
Go to “Alarm configuration”
“Alarm Server” to get the interface as shown below.
You may input the alarm server address and port. When the alarm happens, the camera will
automatically transfer the alarm event to the alarm server. If the alarm server is not used, there
is no need for you to configure here.
3.4
Network Configuration
Network configuration includes nine submenus: Port, IP Address, Server Configuration, IP
Notify, DDNS Config, RTSP, UPNP, Mail configuration, and FTP.
3.4.1
Port
1. 1. Go to “Network config”
“Port” to see the interface as shown below. *Note: you do not
need to change the ports if only 1 camera is being installed.
2. Input port number for IE access in the “HTTP Port” textbox.
3. Input the port number for audio & video transmission in the “Data Port” textbox.
3.4.2
IP Address
1. Go to “Network Configuration”
“IP Address”.