icon.
3.4.8
Mail configuration
Go to “Network Configuration”
“Mail configuration” interface.
1. From Email: sender’s e-mail address.
2. Username and password: sender’s username and password.
3. Server address: SMTP server address (ex. smtp.gmailx.com).
4. Select the secure connection type at the Secure Connection to pull down the list according to
the smtp server authentication requirements.
5. Received email address list: List of all receiving email addresses
6. Received email address: Type in a receiving email address
7. After all, parameters set up, you can click “Test your account settings”. If an email sent
successful, a “Test Successful” window will pop up, if not, users can try other email addresses
or check the smtp settings.
Notice:
If you change the static IP into PPPoE and select the mailbox, there will be an e-mail
sent to your mailbox for notifying a new IP address.
3.4.9
FTP Setting
Go to Network Configuration
FTP Setting to get the interface as shown below.
1. Add: Click Add button to input FTP server’s server name, address, port number, username,
password, and upload path, click OK to confirm the setting.
2. Modify: Click this button to change some information of the FTP server.
3. Delete: Click this button to delete an FTP account.
4. Test: Click this button to test the validity of FTP account.