Sibata LV-40BW, Руководство по эксплуатации

Страница: 32 / 52

- 32 -
S e t u p
S e l e c t
T i m e r
O N : D e l a y T i m e
O F F : R u n T i m e
1 S e l e c t O N T i m e
2 S e l e c t O F F T i m e

Setup – Select Timer (Timer Selection)
When "5 Select Timer" is selected and the
[ENTER] key is pressed, the Select Timer
menu is displayed as shown on the right.
Select the respective menu by the [UP] and
[DOWN] keys, and press the [ENTER] key.
The 3rd and 4th lines show the type of currently
selected ON and OFF timers.
In the example on the right, Delay Time is
selected for the ON timer and Run Time is
selected for the OFF timer.

Select ON Time (ON Timer Selection)
When "1 Select ON Time" is selected and the [ENTER] key is pressed, the Select ON Time
menu is displayed. The default setting is Manual. When an ON timer is selected from among
"Manual," "Delay Time," and "Start Time" by pressing the [UP] and [DOWN] keys, and the
[ENTER] key is pressed, the selection is determined and the screen returns to the Select
Timer menu.
* After selecting an ON timer in the Select ON Time menu, if the
[MENU/ESCAPE] key is pressed before the [ENTER] key is pressed, the
screen will return to the Select Timer menu without the newly entered
value being accepted.
* When the ON timer is set to "Manual," data is not logged in
chronological order at 1-minute intervals. Also, if a power failure
occurs during sampling when performing sampling with the ON timer
set to "Manual," all measurement data before the power failure
occurred will be lost. (

For details, see P46.)

Select OFF Time (OFF Timer Selection)
When "2 Select OFF Time" is selected and the [ENTER] key is pressed, the Select OFF Time
menu is displayed. The default setting is Manual. When an OFF timer is selected from among
"Manual," "Run Time," "Stop Time," and "Total Volume" by pressing the [UP] and [DOWN] keys,
and the [ENTER] key is pressed, the selection is determined and the screen returns to the
Select Timer menu.
* After selecting an OFF timer in the Select OFF Time menu, if the
[MENU/ESCAPE] key is pressed before the [ENTER] key is pressed, the
screen will return to the Select Timer menu without the newly entered
value being accepted.
* When the OFF timer is set to "Manual" or "Total Volume," data is not
logged in chronological order at 1-minute intervals. Also, if a power
failure occurs during sampling when performing sampling with the OFF
timer set to "Manual" or "Total Volume," all measurement data before
the power failure occurred will be lost. (

For details, see P46.)