-
22
-
[3] Total Flow Rate Timer Setting (Total Volume)
When "3 Total Time" is selected, the digits of
integer part is displayed highlighted as shown
on the right.
Press the [UP] and [DOWN] keys to set
the value.
When the setting is finished, press the
[ENTER] key.
Next, the digits of fractional part are displayed
highlighted. Set the values in the same way.
When the setting is finished, press the
[ENTER] key. The newly set value is entered,
and the screen returns to the Setup sub-menu.
After setting a new value, if the [MENU/ESCAPE] key is pressed before
the [ENTER] key is pressed, the screen will return to the Setup
sub-menu without the newly entered value being accepted.
6.5 Starting Sampling
Perform the following procedure after connecting the filter holder, etc. before the backup filter.
Press the [MENU/ESCAPE] key several times until the screen returns to the main screen.
When the screen returns to the main screen, "Setup Set Flow Rate" is initially displayed. Make sure
that the set flow rate is correct.
Pressing the [DOWN] key displays "Setup ON Time" and "Setup OFF Time" in this order. Make
sure that each set value is correct.
If all settings are OK, press the [START/STOP] key. Sampling is started.
When the ON timer is set, the time remaining until sampling is started will be displayed.
When sampling ends successfully, the screen will
change as shown on the right.
Press the [DOWN] key to return to the main
screen.
This completes the series of operations.
For detailed operations and other functions, see the following chapters.
S e t u p
O F F
T i m e
S e
t
T
o
t a
l
V
o
l u m e
m 3
2 0
゜
C
S t a n d a r d
V F
9.
9
9 9
9
9
F i n i s h e d
P r e s s
[ D O W N ]
t o
d i s p l a y
" T o
t a l
V o l u m e " .
M e m o r y
T i m e
R e m a i n i n g : 1 3 3 h r s
