7
•
This product is a flow calibrator. Do not use it for any purpose not indicated in this
manual. Doing so could cause a malfunction.
•
Do not wash the instrument directly in water. Doing so could cause an electric shock,
fire, or malfunction.
•
Do not place anything on top of the instrument. Doing so could cause a malfunction or
accident.
•
Remove the batteries (or unplug the power plug from the outlet if using the AC adapter)
before cleaning or inspecting the instrument. Not doing so could cause an electric shock,
battery leakage, or other problems.
The AC adapter is not protected against liquids, so do not clean it with ethanol.
•
Unplug the AC adapter power plug from the outlet when the instrument is not in use. Not
doing so could cause a fire or malfunction.
•
If not using the instrument for an extended period, store it at normal room temperature in
a dry location away from direct sunlight, with the AC adapter disconnected and batteries
removed. Not doing so could cause battery leakage.
•
Always grip the plug to unplug the AC adapter. Pulling on the cord could damage the
cord and cause an electric shock or fire.
•
Never attempt to connect to the connector using wire or other metal objects, or any other
method not specified in this manual. Doing so could cause a malfunction.
•
Do not permit water, other liquids, or non-atmospheric gases to enter the instrument.
Also, do not permit salt air or other corrosive gases or chemicals to enter the instrument,
either. Doing so could cause a malfunction or fire.
•
Do not insert screws or other foreign objects into instrument gaps. Doing so could cause
a malfunction. If a foreign object accidentally enters the instrument, immediately switch
the power OFF and remove the batteries. Then contact your Sibata representative or the
distributor where you purchased the product.
•
The normal operating temperature range of this product is 0 to 40
°
C, with humidity
between 10 and 90 % RH (and no condensation). Operating the instrument outside
these temperature and humidity ranges could reduce performance, shorten the service
life, or cause a malfunction.
•
Keep the instrument away from sources of noise. Also, do not place it in areas with
strong magnetic fields, high dust levels, or high humidity. Doing so could cause
instrument damage or other problems.
