9
INSTALL BRACKETS
Mount the motor and idler brackets to structural supports as shown. Refer to your order or
the packaging to get the UNIT WIDTH = W and make sure the brackets measure the same
UNIT WIDTH dimension from outside to outside. Also make sure the motor bracket is on the
correct side as specified on the order. The brackets must be mounted on a level line as well
as plumb. The brackets can be mounted to the ceiling or a vertical wall face. Make sure that
they are mounted such that the weight bar will align with the location of the cable guide.
Level
Plumb
Unit Width
2
2 5 ”
1
4 2 ”
1
4 2 ”
9
3 10 ”
7
3 8 ”
2
2 5 ”
