7
SPECIFYING YOUR SHADE DIMENSIONS
Wall Surface Mount
Middle opening width
Bottom opening width
Top opening width
Total
opening
height
Total
unit
height
=
Total
opening
height
=
10”
2 38 ”
Weight bar and Gasket
Total unit width
= Largest opening width
= 3 1/2’’
Open roll
7" MIN
10" MIN
3 78 "
4 12 "
The measurements written on the order form
will be the measurements produced. No
deductions are taken on submitted order form.
Use this formula for specifying shades where the roll and cable guide can NOT be seen from the
inside of the opening.
Ensure opening is plumb & parellel. If not, order extra width to keep cable guide out of view from
the inside.
LARGEST OPENING WIDTH + 3 1/2'' = TOTAL UNIT WIDTH = W
TOTAL HEIGHT OF O10'' = TOTAL UNIT HEIGHT = H
Width -
Measure the total width at the top, middle, and bottom of your opening. Take the largest
measurement and add 3 1/2''. This will give you the TOTAL UNIT WIDTH of your shade and allow only
the fabric to be seen from inside your opening.
Drop -
Measure the total height of your opening. If you don't want the cassette and bottom bar to be
visible when the unit is completely retracted, please add 10" inches to your opening's height. We do
manufacture the tracks or guides for your system 5" longer than your TOTAL UNIT HEIGHT. So you
can have a little adjustment on site.
