6
Bottom opening width
Top opening width
Middle opening width
Total unit width
= Middle opening width - 1/4''
Total
unit
height
=
Total
opening
height
2 38 "
Weight bar and Gasket
Open roll
7" MIN
10" MIN
3 78 "
4 12 "
SPECIFYING YOUR SHADE DIMENSIONS
Use this formula for specifying shades were the roll and cable guide can be seen from the inside of
the installation opening.
Width -
Measure the total width at the top, middle, and bottom of your opening. Take the smallest
measurement of the three and deduct a total of 1/4". This will give you the TOTAL UNIT WIDTH of
your shade.
Drop -
Measure the total height of your opening. That will be your TOTAL UNIT DROP for your shade.
We do manufacture the tracks or guides for your system 5" longer than your TOTAL UNIT HEIGHT so
you can have a little adjustment on site.
The measurements written on the order form
will be the measurements produced. No
deductions are taken on submitted order form.
MINIMUM OPENING WIDTH - 1/4'' = TOTAL UNIT WIDTH = W
TOTAL HEIGHT OF OPENING = TOTAL UNIT HEIGHT = H
Between Columns Ceiling Mount
