SI 201576, Руководство по установке

Страница: 14 / 24

14
3. Make screen/shade adjustments
Screen/shades have upper and lower limits set at the
factory. The typical screen installation should not require the
upper limit being modified, however the lower limit is often
modified, using 1 of the following 2 methods:
a. Adjusting lower limit to a new higher position
- Press the DOWN button on the Decoset to move the
screen to the current lower limit.
- Press and hold until you reach the desired position.
- Optionally, pressing or holding either of the or will
move the screen accordingly.
- Finally, hold the SET LOWER button until you see the
status LED flash twice. Now, release to save the current
position as the new lower limit.
b. Adjusting lower limit to a new lower position
- Press the DOWN button on the Decoset to move the
screen to the current lower limit.
- Press and hold the SET LOWER button until you achieve
the desired position and when you release the button,
the lower limit is now set to the current position.
Decoset Setting commands (Black buttons)