Si-tex T-760 Series, Инструкция по эксплуатации

Страница: 82 / 252

Chapter 2 START THE BASIC OPERATION
48
AIS DATA (when received the AIS signal, the data of MMSI of the vessel which has
transmitted, latitude, longitude, a direction of movement, speed, rate of turn, etc. is displayed.)
(AIS receiver signal is necessary.)
EBL (electronic bearing line)
Measure the target direction by using cursor line.
VRM (variable range marker)
Measure the target distance by using circle line.
Off-center (Normally own position is the center of screen, but it is possible to move own
position from fixed center of screen).
Tap the icon will shift the own position. Shifting point are fixed 5 positions only.
TX (transmission), ST-BY (standby)
Whenever it carries out a tap, transmission and ST-BY are changed.
RANGE (range scale)
The range scale to observe is changed. The maximum range is limited by the scanner type
which is connected.
NKE-1066(NL) scanner
0.0625NM 0.125NM 0.25NM 0.5NM .075NM 1.5NM 3NM 6NM 12NM 24NM.
(Also 1NM, 2NM, 4NM, 8NM, 16NM are possible by system menu setting.)
NKE-2044(NL) scanner
0.0625NM 0.125NM 0.25NM 0.5NM .075NM 1.5NM 3NM 6NM 12NM 24NM 48NM.
(Also 1NM, 2NM, 4NM, 8NM, 16NM, 32NM are possible by system menu setting.)