Si-tex T-760 Series, Инструкция по эксплуатации

Страница: 205 / 252

Chapter 10 AFTER-SALE SERVICE
171
Chapter 10 AFTER-SALE SERVICE
10.1 KEEPING PERIOD OF MAINTENANCE
PARTS
Keeping period of maintenance parts is ten years from the production is discontinued.
10.2 WHEN YOU REQUEST FOR REPAIR
If you suppose the product may be out of order, read the description in "9-2-5 FAULT
FINDING" and "9-2-6 TROUBLE SHOOTING", and check the suspected point again.
If it is still out of order, you are recommended to stop operation of the equipment and
consult with the dealer from whom you purchased the product, or our branch office in
your country or district, the sales department in our main office in Tokyo.

Repair within the Warranty Period
If any failure occurs in the product during its normal operation in accordance with the instruction
manual, the dealer or SI-TEX will repair free of charge.
In case that any failure is caused due to misuse, faulty operation, negligence or force major
such as natural disaster and fire, the product will be repaired with charges.

Repair after the Warranty Period.
If any defective function of the product is recoverable by repair, the repair of it will be made at
your own charge upon your request.

Necessary Information for Repair
☆
Product name, model, manufacturing date and serial number
☆
Trouble conditions (as detailed as possible. Refer to page "
10-4 Radar failure check list
".)
☆
Name of company/organization, address and telephone number
10.3 RECOMMENDED MAINTENANCE
The performance of the product may deteriorate due to the secular change of the parts used in it,
though such deterioration depends upon the conditions of operation.
So checkup and maintenance is recommendable for the product in addition to your daily care.
For maintenance, consult with the near-by dealer or our sales department.
Such maintenance will be made with charges.
For further details of after-sale service, contact the JRC Offices.