Si-tex T-760 Series, Инструкция по эксплуатации

Страница: 130 / 252

Chapter 5 VARIOUS FUNCTION ICONS
96
5.17.1 FUNCTION ON/OFF
Turns ON/OFF tracking target and AIS function.
5.17.2 CPA LIMIT
Set and check collision decision criteria before operating.
The CPA Limit value can be set between 0.1 and 9.9NM.
5.17.3 TCPA LIMIT
Set and check collision decision criteria before operating.
The TCPA Limit value can be set between 1 and 99 min.
5.17.4 CPA RING DISPLAY
Sets the CPA ring display. While the distance of the specified CPA Limit value is used as the radius, the CPA
ring is displayed with a white circle of which center is the own ship’s position. The CPA ring is not displayed
when the true vector mode is selected.
5.17.5 TARGET NUMBER DISPLAY
A target ID number is a value displayed beside the target symbol or AIS symbol. These numbers are
assigned to targets in acquisition order.
The numbers 1 to 10 are automatically assigned. Each target is identified by the assigned ID number until it is
lost or its acquisition is canceled.
5.17.6 ALR ALARM FROM AIS
Sets the display of NMEA ALR sentence received from AIS.
5.17.7 AIS DISPLAY TARGETS
Sets the number of AIS display targets. Set this to get a better look at the screen by limiting the number of
AIS symbols.
5.17.8 AIS LIST DISPLAY
Sets the AIS List Display. “ON” is selected, then tap icon, AIS list displays as following.